0 Inch | 0 Millimeter x 2.318 Inch | 58.877 Millimeter x 0.465 Inch | 11.811 Millimeter TIMKEN LM67010BA-2 Tapered Roller Bearings
With over 10170 0 Inch | 0 Millimeter x 2.318 Inch | 58.877 Millimeter x 0.465 Inch | 11.811 Millimeter full-service stores, our 0 Inch | 0 Millimeter x 2.318 Inch | 58.877 Millimeter x 0.465 Inch | 11.811 Millimeter TIMKEN LM67010BA-2 Tapered Roller Bearings inventory is extensive and our parts AMERICAN BEARING MFG.CORP. are priced right. within 24 hours. SCHAEFFLER GROUP Manufacturer Name This helps you maximize your productivity by saving time and your hard-earned dollars.
What is LM67010BA-2 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
LM67010BA-2 |
| Series: |
15000 |
| Cone Part Number: |
15112 |
| Cup Part Number: |
15249 |
| Design Units: |
Imperial |
| Bearing Weight: |
0.30 Kg |
| Cage Type: |
Stamped Steel |
| d: |
28.575 mm |
| D: |
63.500 mm |
| PDF |
LM67010BA-2 |
Product Details
| Series |
15000 |
| Cone Part Number |
15112 |
| Cup Part Number |
15249 |
| Design Units |
Imperial |
| Bearing Weight |
0.30 Kg |
| Cage Type |
Stamped Steel |
| d |
28.575 mm |
| D |
63.500 mm |
| B - Cone Width |
20.638 mm |
| C - Cup Width |
15.875 mm |
| B |
20.638 mm |
| R - Cone Backface To Clear Radius1 |
3.560 mm |
| r - Cup Backface To Clear Radius2 |
1.52 mm |
| da - Cone Frontface Backing Diameter |
34.04 mm |
| db - Cone Backface Backing Diameter |
39.88 mm |
| Da - Cup Frontface Backing Diameter |
59.44 mm |
| Db - Cup Backface Backing Diameter |
55.12 mm |
| Ab - Cage-Cone Frontface Clearance |
1.8 mm |
| Aa - Cage-Cone Backface Clearance |
0.8 mm |
| a - Effective Center Location3 |
-5.8 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
3490 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
13500 lbf |
| C0 - Static Radial Rating |
12100 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
2090 lbf |
| K - Factor7 |
1.67 |
| e - ISO Factor8 |
0.35 |
| Y - ISO Factor9 |
1.71 |
| G1 - Heat Generation Factor (Roller-Raceway) |
14.6 |
| G2 - Heat Generation Factor (Rib-Roller End) |
10 |
| Cg - Geometry Factor |
0.0606 |