2.756 Inch | 70.002 Millimeter x 0 Inch | 0 Millimeter x 1.142 Inch | 29.007 Millimeter TIMKEN 484-3 Tapered Roller Bearings
With over 0.0 Inventory 10170 full-service stores, our 2.756 Inch | 70.002 Millimeter x 0 Inch | 0 Millimeter x 1.142 Inch | 29.007 Millimeter TIMKEN 484-3 Tapered Roller Bearings inventory is extensive and our parts are priced right. within 24 AMERICAN BEARING MFG.CORP. hours. This helps BUNTING BEARINGS Brand you maximize your productivity by saving time 2.756 Inch | 70.002 Millimeter x 0 Inch | 0 Millimeter x 1.142 Inch | 29.007 Millimeter and your hard-earned dollars.
What is 484-3 bearing interchange？
| Brand Name: |
TIMKEN |
| Model Number: |
484-3 |
| Series: |
560000 |
| Cone Part Number: |
EE560629 |
| Cup Part Number: |
561251 |
| Design Units: |
Imperial |
| Bearing Weight: |
25.700 Kg |
| Cage Type: |
Stamped Steel |
| d: |
159.918 mm |
| D: |
317.500 mm |
| PDF |
484-3 |
Product Details
| Series |
560000 |
| Cone Part Number |
EE560629 |
| Cup Part Number |
561251 |
| Design Units |
Imperial |
| Bearing Weight |
25.700 Kg |
| Cage Type |
Stamped Steel |
| d |
159.918 mm |
| D |
317.500 mm |
| B - Cone Width |
76.200 mm |
| C - Cup Width |
53.975 mm |
| B |
77.790 mm |
| R - Cone Backface To Clear Radius1 |
10.410 mm |
| r - Cup Backface To Clear Radius2 |
4.83 mm |
| da - Cone Frontface Backing Diameter |
183.90 mm |
| db - Cone Backface Backing Diameter |
201.93 mm |
| Da - Cup Frontface Backing Diameter |
288.50 mm |
| Db - Cup Backface Backing Diameter |
278.89 mm |
| Ab - Cage-Cone Frontface Clearance |
4.8 mm |
| Aa - Cage-Cone Backface Clearance |
12.7 mm |
| a - Effective Center Location3 |
-8.1 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 |
60700 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 |
234000 lbf |
| C0 - Static Radial Rating |
295000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 |
48200 lbf |
| K - Factor7 |
1.26 |
| e - ISO Factor8 |
0.46 |
| Y - ISO Factor9 |
1.29 |
| G1 - Heat Generation Factor (Roller-Raceway) |
659.4 |
| G2 - Heat Generation Factor (Rib-Roller End) |
77.8 |
| Cg - Geometry Factor |
0.126 |