0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter TIMKEN 393-2 Tapered Roller Bearings
With SCHAEFFLER GROUP Manufacturer Name over 10170 full-service stores, our 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter TIMKEN 393-2 Tapered Roller Bearings inventory is 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter extensive and our parts are priced right. within 24 hours. This Bearings Category helps you maximize your productivity by saving AMERICAN BEARING MFG.CORP. time and your hard-earned dollars.
What is 393-2 bearing cross reference？
| Brand Name: |
TIMKEN |
| Model Number: |
393-2 |
| Series: |
543000 |
| Cone Part Number: |
543086 |
| Design Units: |
Imperial |
| Cage Type: |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1: |
93600 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2: |
24300 lbf |
| d: |
8.6602 in |
| B - Cone Width: |
1.2500 in |
| PDF |
393-2 |
Product Details
| Series |
543000 |
| Cone Part Number |
543086 |
| Design Units |
Imperial |
| Cage Type |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 |
93600 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 |
24300 lbf |
| d |
8.6602 in |
| B - Cone Width |
1.2500 in |
| R - Cone Backface To Clear Radius3 |
0.14 in |
| da - Cone Frontface Backing Diameter |
9.02 in |
| db - Cone Backface Backing Diameter |
9.25 in |
| Ab - Cage-Cone Frontface Clearance |
0.14 in |
| Aa - Cage-Cone Backface Clearance |
0.14 in |
| a - Effective Center Location4 |
0.51 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 |
13900 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)6 |
53800 lbf |
| C0 - Static Radial Rating |
102000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 |
9190 lbf |
| K - Factor8 |
1.52 |
| G1 - Heat Generation Factor (Roller-Raceway) |
608.5 |
| G2 - Heat Generation Factor (Rib-Roller End) |
232.3 |
| Cg - Geometry Factor |
0.113 |