0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter TIMKEN 393-2 Tapered Roller Bearings
With SCHAEFFLER GROUP Manufacturer Name over 10170 full-service stores, our 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter TIMKEN 393-2 Tapered Roller Bearings inventory is 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 1.063 Inch | 27 Millimeter extensive and our parts are priced right. within 24 hours. This Bearings Category helps you maximize your productivity by saving AMERICAN BEARING MFG.CORP. time and your hard-earned dollars.
What is 393-2 bearing cross reference？
| Brand Name: | TIMKEN |
| Model Number: | 393-2 |
| Series: | 543000 |
| Cone Part Number: | 543086 |
| Design Units: | Imperial |
| Cage Type: | Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1: | 93600 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2: | 24300 lbf |
| d: | 8.6602 in |
| B - Cone Width: | 1.2500 in |
| PDF |
393-2 |
Product Details
| Series | 543000 |
| Cone Part Number | 543086 |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 93600 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 24300 lbf |
| d | 8.6602 in |
| B - Cone Width | 1.2500 in |
| R - Cone Backface To Clear Radius3 | 0.14 in |
| da - Cone Frontface Backing Diameter | 9.02 in |
| db - Cone Backface Backing Diameter | 9.25 in |
| Ab - Cage-Cone Frontface Clearance | 0.14 in |
| Aa - Cage-Cone Backface Clearance | 0.14 in |
| a - Effective Center Location4 | 0.51 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 13900 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 53800 lbf |
| C0 - Static Radial Rating | 102000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 9190 lbf |
| K - Factor8 | 1.52 |
| G1 - Heat Generation Factor (Roller-Raceway) | 608.5 |
| G2 - Heat Generation Factor (Rib-Roller End) | 232.3 |
| Cg - Geometry Factor | 0.113 |
